In industrial machinery applications, products such as stainless steel joints are indispensable. If purchasers do not have relevant professional knowledge when selecting joints, it is likely to cause differences between the purchased model and the application requirements, which will seriously cause damage to engineering quality.
Method for correctly selecting stainless steel quick connector:
1, choose the type of joint from the type and temperature of the fluid. The fluid type and fluid temperature have a great impact on the stability and service life of the joint, so you need to choose based on these two items. If the stainless steel quick joint is used in the air, steel joints can be used. For water, brass or stainless steel can be used.
2. Select joints according to liquid pressure. If the pressure of the fluid is too large to exceed the joint's bearing range, the joint may burst and be damaged. The pressure range of the joint of different structures is also different, so the joint should be selected according to the pressure.
3, choose the connector according to the external environment. If the humidity of the application environment is too large, you can choose stainless steel joints if you need to prevent rust. If it is a corrosive environment, you can choose brass joints, so you need to choose the material of the joints according to the environment (temperature, humidity, corrosion degree, dust, etc.) before use. , Tightness, etc.
4. Test before installation and use, and install it into the engineering product after it is stable.