Any product has a service life and shelf life. The stainless steel metal hose joint is unprecedented. After long-term use and wear, leakage may occur. How to take effective measures to remedy in time may cause series production and safety problems.

When it is found that the stainless steel metal hose joint leaks, it is recommended to take the following measures for remedial treatment in a timely manner:

1. Replace the metal hoses of all synthetic water tank outlets;

2. Replace all parts and materials that have come into contact with the medium, including flanges, metal joints, etc.;

3. Before adjusting the installation position of the original gate valve on the tank to the metal hose, once the metal hose has a problem, the valve can be cut off to avoid a large amount of leakage of the medium in the tank; at the same time, even if the metal hose joint leaks again, it is easy to quickly replace. To minimize the impact on production and safety

Preventive measures to avoid leakage of metal hose joints:

In order to allow the metal hose to function normally during use, in addition to taking timely remedial measures when a leak is found, it is necessary to strengthen the precautions before this to avoid leaks as much as possible. The editor of the official website of the metal hose connector gives the staff the following suggestions:

1. Before selecting the model, the designer needs to understand the medium flowing through the metal hose, including the composition and corrosion of the medium, correctly select the parts and materials of the overcurrent part, and put forward the corresponding technical requirements to avoid the occurrence of galvanic corrosion.

After being put into use, the inspection of metal hose joints in important parts should be strengthened, and the change of process medium should be closely monitored. Once the process medium index related to corrosion changes, such as increased conductivity and decreased pH, etc., the metal softness should be confirmed in time. Can the pipes and joints meet the requirements of the existing process, and take necessary precautions in a timely manner.