News

  • Diaphragm coupling structure and plum blossom elastic coupling technology

    Diaphragm coupling structure and plum blossom elastic coupling technology

    The diaphragm coupling bolt connection does not need to be threaded on the connecting piece, the use is not restricted by the connecting piece, the structure is simple, and the disassembly and assembly are convenient. Stud bolts can be used in occasions where bolts cannot be used due to structural r... Read More

    29-07-2020 News
  • The performance requirements of the coupling

    The performance requirements of the coupling

    According to different working conditions, the coupling must have the following performance: (1) Mobility. The mobility of the coupling refers to the ability to compensate for the relative displacement of the two rotating components. Factors such as manufacturing and installation errors between the ... Read More

    23-07-2020 News
  • Couplings can be divided into two categories: rigid couplings and flexible couplings

    Couplings can be divided into two categories: rigid couplings and flexible couplings

    Couplings are also called couplings. Mechanical components used to firmly connect the drive shaft and driven shaft in different mechanisms to rotate together and transmit motion and torque. Sometimes used to connect the shaft and other parts (such as gears, pulleys, etc.). It is often composed of tw... Read More

    16-07-2020 News
  • Storage of hoses and fittings

    Storage of hoses and fittings

    In order to ensure that the hose is used during its effective use period, an appropriate system should be established to control the storage of the hose. Hose should be stored in accordance with the principle of conducive to the control of expiration date and first-in first-out. However, since the e... Read More

    08-07-2020 News
  • Assembly instructions for metal hose connectors

    Assembly instructions for metal hose connectors

    1. Pipe preparation • The cut at the end of the pipe must be flat, and the angle tolerance is allowed within 0.5 degrees. • Remove burrs from the inner and outer edges. Clean the tubing and remove chips. • Do not use a pipe cutter or cutting grinder. • The straight length of the pipe must be at leas... Read More

    02-07-2020 News
CONTACT US